PermaSleeve Heat Shrink Wire and Cable Tubing for 3" Core Printers - 1/4" Dia, Black

Overview

PermaSleeve Heat Shrink Tubing is engineered for thermal transfer or dot matrix printing and is ideal for use in wire identification.

• 3:1 heat shrinkable sleeve fit snugly around wires for maximum insulation protection and permanent identification
• Fade-resistant and smudge-proof for superior aesthetic appearance
• Cold resistant and flame-retardant with an operating temperature of -67°F to 275°F (-55°C to 135°C)
• Meets SAE-AMS-DTL-23053/5C (Class 1), SAE-AS-81531, MIL-STD-202;RoHS Compliant;and UL Recognized
• A ribbon is required to print this material. Use Part Number IP-R6606 for the BradyPrinter i5100 or BRADY IP® Series Label Printer; use R6606 for a different printer
• When used with BradyPrinter i5100 and BRADY IP® Series Label Printer this part must be fed externally into printer, and will also operate in full manual mode and is not enabled with Brady PrintSmart chip technology
• For use with other printers, consult printer's specification for minimum media width and material type compatability, and test for intended use
• For use with other printers, this part may also be required to be externally fed

Specifications

Key Characteristics

Key Characteristics	Catalog Page #	198
	Prod Number	133111
	Product Number	133111
	UPC	754473897727
	UOM	Roll
	Trade Name	PermaSleeve®
	Brand Name	Brady®

Dimensions

Dimensions	Dimensions	11,15 mm (H) x 27,43 m (L)
	Height	11.15 mm
	Length	27.43 m
	Roll Length	27.43 m
	Sleeve Size	6.35 mm Dia x 27.43 m L
	Recovered Diameter	2.39 mm
	Recovered Wall Thickness	0.64 mm
	Diameter as Supplied	6.35 mm
	Wire Diameter Range	2,39 mm - 5,46 mm
	Wire Gauge Range	16 AWG - 8 AWG
	Core Diameter	41.28 mm

Material Characteristics

Material Characteristics	Material Number	B-342 (View Technical Data Sheet)
	Material	Heat-shrink Polyolefin Sleeve
	Material Properties	Flame-retardant, Heat-shrinkable
	Label Properties	Heat Shrink
	Finish	Matte
	Color	Black
	Resistance Properties	Chemical-resistant, Smear-resistant
	Shrink Ratio	3:1
	Service Temperature Range (°C)	-55 °C - 135 °C
	Minimum Service Temperature (°C)	-55 °C
	Maximum Service Temperature (°C)	135 °C

Product Features

Product Features	Application	Wire and Cable Labeling
	Printable Sides	Single-Side Printable

Printing Specifications

Printing Specifications	Print Technology	Thermal Transfer

Compatibility

Compatibility	Printer Compatibility	BBP72, i5100, i7100, i7500, THT 76 mm Core Printers
	Recommended Ribbon	i75-R6700-WT, IP-R6700-WT, R6700-WT

Compliance

Compliance	UNSPSC	39131502
	Country of Origin	United States of America
	HTS Code (Harmonized Tariff Schedule)	84439990
	RoHS Compliance Status	Compliant with Directive 2011/65/EU and 2015/863