What are the ANSI Z535
safety signage standards?

ANSI Z535.1 — Color codes for safety signage

Section 1 of the ANSI Z535 standard provides standards for color-coding safety signage. Similar to OSHA-adopted standards, it describes in detail what colors should be used for each type of safety signage, including:

ANSI Z535.2 — Visibility and legibility of safety signage

Section 2 outlines standards for uniformity within the layout of safety signs to provide visibility and legibility. Think sign size and shape, as well as symbols.

This consistency — the fact that someone will come to know a particular color or shape associated with a certain aspect of safety — improves the likelihood of being able to immediately recognize a safety sign, even if seen at a distance.

Safety words & signal words

The section about visibility and legibility of safety signage also addresses the formatting of words used on the signage. Like the other standards outlined in this section, standards for word formatting are meant to clearly and immediately communicate the level of danger presented.

Following these standards:

	“Danger” should be written in white lettering over a red background
	“Caution” should be written in black lettering over a yellow background
	“Warning” should be written in black lettering over an orange background
	“Notice” should be written in white lettering over a blue background

When seconds count in an urgent situation, consistent formatting can mean the difference between a good outcome and a bad one.

ANSI Z535.3 — Safety symbols

Section 3 details safety symbols. Not to be understated, safety symbols can be more universally recognizable than wording. After all, you don’t have to translate symbols into various languages.

ANSI Z535 presents four major categories for safety symbols: hazard alerting, mandatory action, prohibition and informational.

ANSI Z535.4 — Product safety signs and labels

Section 4 details safety signage standards. Here you’ll dig into the appropriate use of labels on individual products. For example, signage providing instructions for machine operation and machine equipment will be different depending on the type and location of the machine.

Not only will you learn about the label itself, you’ll also find details on label design and how to apply various labels. In situations of high heat or harsh environments, durability is key. As such, standards should also meet durability requirements. It's important to find the correct safety sign material so that your signs can withstand such environments. These labels may also be used to provide safety-related instructions for operators or repair workers who interact with the product.

 

ANSI Z535.5 — Safety tags and barricade tape

From squaring off areas for clearing to blocking off a crime scene, barricade tape is essential in a variety of situations — hence its detailing in section 6 of ANSI safety and signage standards. Here, you’ll find barricade tape standards, as well as proper applications for using barricade tape. For example, if a staircase is damaged or chemicals are spilled, barricade tape may be used to advise employees of the danger.

This section also discusses best practices for labels and signage used in lockout / tagout procedures. Lockout / tagout labels are used to confirm that a machine is off and prevent it from being restarted without removing the label. Meanwhile, lockout / tagout signage advises that a lockout / tagout procedure should be observed.

 

ANSI Z535.6 — Instructional materials

To top it all off, section 6 outlines standards between collateral materials (think additional informational materials like product safety manuals) and safety signage.

According to this section, all additional information regarding safety signage presented in collateral materials should be consistent with the standards outlined in previous sections of ANSI Z535. This is meant to prevent conflicting outside information from tarnishing safety signage expectations.

Stay up to date

Although many would assume these standards stay consistent, think otherwise. ANSI standards are updated every five years, so make sure you’re checking back periodically.

Suggested updates are either approved or denied by the ANSI Board of Standards Review. The most recent update occurred in 2017, and even brought about changes for color-coding in safety signage.

Applications and industries

All of these standards can be used in a variety of industries: manufacturing, construction and food production, just to name a few. Take a look at how these standards work to prevent common emergencies like:

• Slip-and-fall hazards
• Chemical hazards
• High-voltage hazards
• Various machinery-specific hazards such as forklift safety signs

In addition, these standards are used for general purposes such as:

• Instructions for use
• Marking of pathways
• Restrictions of access
• Reminders of lockout / tagout procedures
• Advisement of materials in use

And there’s more — find other helpful materials

While ANSI Z535 standards are effective guidelines for safety, they can’t serve their purpose unless properly practiced. For example, if you do not have the right printing equipment available, you may not be able to produce safety signage that meets the ANSI Z535 specifications.

Color values may be inexact, signage may be formatted incorrectly or you may not be able to use durable labeling materials for your sign and label printer. To avoid this, workplaces must do their part, ensuring the proper equipment and materials to fully meet these standards.